Product: Handlebars: Page 1 | 2 | 3

Your source for handlebars and handlebar accessories. Also see handlebar riser combos for custom American V-Twin and Harley Davidson Motorcycles.

When deciding which handlebars are best for you and your bike take these measurements into consideration;

• What is "Height or End Rise"? With the handlebars on a table in a riding position and measured straight up from the table to the top point at the control ends (do not measure diagonally from the bar center to the control ends).
• What is Pullback? Again with the bars on a table in a riding position, measure from the front side of the center mounting points to the furthest point back at the control end of the bars
• Center Width is the measurement of the perfectly flat part of the center tubing section
• Width is measured from absolute control end tip to control end tip (w/o grips)

Wild One© 1.25" Thick Chubby© Handlebars
Chrome
Custom 1.25" thick with smooth polished riser welds and pre-drilled for internal wiring. They are 30.5" wide with superior bends for comfort and control. Pullback risers are spaced 3.5" on center for standard triple trees, threaded .5" x 13. They clear the tank and dash on all stock model bikes and work with the stock cables, brake line and wiring on most models.

Chubby© 6.0" Drags, 4.5" end rise, 10.5" pullback

Chubby© 8.0" Drag Bars, 5.5" end rise, 11.5" pullback

Wild One© 1.25" Thick Chubby© 12" Ape Hanger Handlebars
Chrome
Awesome bends place your hands and wrists at the best angle for maximum leverage, comfort and control. A sensational custom look on all stock models and custom bikes.

36.5" width, end rise 12.5", center 10.0", 12.0" pullback

Wild One© 1.25" Thick Chubby© 10" Ape Hanger Handlebars
Chrome
Awesome bends place your hands and wrists at the best angle for maximum leverage, comfort and control. A sensational custom look on all stock models and custom bikes.

36" width, end rise 10", center 10.0", 11.0" pullback

Wild One© 1.25" Thick Chubby© Knuckle Handlebars Super Low
Chrome
Super low and wide for a cool custom look. Great fit on Fatboy©, Heritage©, FLH© Shovel models and custom bikes. Work with the stock cables, brake line and wiring.

36.5" width, end rise 2.0", center 10.0", 8.5" pullback

Wild One® Chubby® Dresser FLSTC, FLSTF Handlebars
Chrome
The ultimate combination of comfort, control and styling on Fatboy®, Heritage®, FLH Shovel models and custom bikes. Fluid bends that provide great hand and wrist placement for optimum riding position. Work with stock cables, brake line and wiring on FLHR, FLSTC and FLSTF models.

34.5" width, end rise 4.5", center 10.25", 12.5" pullback

Wild One® 1.25" Chubby® Road King Handlebars
Chrome
Specifically designed for the Road King® with the additional pullback needed for riders average height and under. A great fit on FLSTC, FLSTF, for short riders and they go great on stretch frame custom bikes. Fluid bends with a 16.0" pullback puts you in the comfort zone! No more back, neck and shoulder aches from leaning to reach your bars. Work with stock controls, cables, brake line and wiring on FLHR, FLSTC and FLSTF models. Note: We recommend using stock plus 4" throttle and idle cables on FLHR and FLHRCI models with cruise control.

32.5" width, end rise 5.5", center 12.0", pullback

Wild One® 1.25" Chubby® Ape Hanger Handlebars
Chrome
Big handlebars for big bikes, great custom look. Awesome bends place your hands and wrists at the best angle for maximum leverage, comfort and control.

37.0" width, end rise 16", center 10.0", 12.5" pullback